| |
A GLOSSARY OF COMMON CCTV TERMS
TERMS AND DEFINITIONS
- AGC
- Automatic Gain Control. A circuit for automatically controlling amplifier gain in order
to maintain a constant output voltage with a varying input voltage within a predetermined
range of input-to-output variation.
- Aperture
- In television optics, it is the effective diameter of the lens that controls the amount
of light reaching the photoconductive or photoemitting image pickup sensor.
- Aperture Correction
- Compensation for the loss in sharpness of detail because of the finite dimensions of the
image elements or the dot-pitch of the monitor.
- Aspect Ratio
- The ratio of width to height for the frame of the televised picture. 4:3 for standard
systems, 5:4 for 1K x 1K, and 16:9 for HDTV.
- Attenuation
- In general terms, a reduction in signal strength.
- Auto Balance
- A system for detecting errors in color balance in white and black areas of the picture
and automatically adjusting the white and black levels of both the red and blue signals as
needed for correction.
- Auto Light Range
- The range of light, e.g., sunlight to moonlight, over which a TV camera is capable of
automatically operating at specified output.
- Automatic Brightness Control
- In display devices, the self-acting mechanism which controls brightness of the device as
a function of ambient light.
- Automatic Frequency
- An arrangement whereby the frequency of an oscillator is automatically maintained within
specified limits.
- Automatic Gain Control
- A process by which gain is automatically adjusted as a function of input or other
specified parameter.
- Automatic Iris Lens
- A lens that automatically adjusts the amount of light reaching the imager.
- Automatic Light Control
- The process by which the illumination incident upon the face of a pickup device is
automatically adjusted as a function of scene brightness.
- Back Porch
- That portion of the composite picture signal which lies between the trailing edge of the
horizontal sync pulse and the trailing edge of the corresponding blanking pulse.
- Bandwidth
- The number of cycles per second (Hertz) expressing the difference between the lower and
upper limiting frequencies of a frequency band; also, the width of a band of frequencies.
- Bar Test Pattern
- Special test pattern for adjusting color TV receivers or color encoders. The upper
portion consists of vertical bars of saturated colors and white. The power horizontal bars
have black and white areas and I and Q signals.
- Blooming
- The defocusing of regions of the picture where the brightness is at an excessive level,
due to enlargement of spot size and halation of the fluorescent screen of the cathode-ray
picture tube. In a camera, sensor element saturation and excess which causes widening of
the spatial representation of a spot light source.
- Bounce
- Sudden variations in picture presentation (brightness, size, etc.,) independent of scene
illumination.
- Brightness
- The attribute of visual perception in accordance with which an area appear to emit more
of less light. (Luminance is the recommended name for the photo-electric quantity which
has also been called brightness.)
- Broadband
- In television system use, a device having a bandpass greater than the band of a single
VHF television channel.
- Burned-In-Image
- Also called burn. An image which persists in a fixed position in the output signal of a
camera tube after the camera has been turned to a different scene or, on a monitor screen.
- CCD
- See Charge Coupled Device
- C Mount
- A television camera lens mount of the 16 mm format, 1 inch in diameter with 32 threads
per inch.
- CCTV
- Common abbreviation for Closed-Circuit Television.
- Charge-Coupled Device
- CCD. For imaging devices, a self-scanning semiconductor array that utilizes MOS
technology, surface storage, and information transfer by shift register techniques.
- Chroma
- That quality of color which embraces both hue and saturation. White, black, and grays
have no chroma.
- Chroma Control
- A control of color television receiver that regulates the saturation (vividness) of
colors in a color picture.
- Chroma Detector
- Detects the absence of chrominance information in a color encoder input. The chroma
detector automatically deletes the color burst from the color encoder output when the
absence of chrominance is detected.
- Chromatic Aberration
- An optical defect of a lens which causes different colors or wave lengths of light to be
focused at different distances from the lens. It is seen as color fringes or halos along
edges and around every point in the image.
- Chromaticity
- The color quality of light which is defined by the wavelength (hue) and saturation.
Chromaticity defines all the qualities of color except its brightness.
- Chrominance
- A color term defining the hue and saturation of a color. Does not refer to brightness.
- Chrominance Signal
- That portion of the NTSC color television signal which contains the color information.
- Clamp
- A device which functions during the horizontal blanking or synchronizing interval to fix
the level of the picture signal at some predetermined reference level at the beginning of
each scanning line.
- Clamping
- The process that established a fixed level for the picture level at the beginning of
each scanning line.
- Clipping
- The shearing off of the peaks of a signal. For a picture signal. This effects the
positive (white).
- Coaxial Cable
- A particular type of cable capable of passing a wide range of frequencies with very low
signal loss. Such a cable in its simplest form, consists of a hollow metallic shield with
a single wire accurately placed along the center of the shield and isolated from the
shield.
- Color Burst
- That portion of the composite color signal, comprising a few cycles of a sine wave of
chrominance subcarrier frequency, which is used to establish a reference for demodulating
the chrominance signal. Normally approximately 9 cycles of 3.579545 MHz.
- Color Edging
- Extraneous colors appearing at the edges of colored objects, and differing from the true
colors in the object.
- Color Encoder
- A device which produces an NTSC color signal from separate R, G, and B video inputs.
- Color Fringing
- Spurious colors introduced into the picture by the change in position of the televised
object from field to field.
- Color Purity
- The degree to which a color is free of white or any other color. In reference to the
operation of a tri-color picture tube it refers to the production of pure red, green or
blue illumination of the phosphor dot face plate.
- Color Saturation
- The degree to which a color is free of white light.
- Color Sync Signal
- A signal used to establish and to maintain the same color relationships that are
transmitted.
- Color Transmission
- The transmission of a signal which represents both the brightness values and the color
values in a picture.
- Composite Video Signal
- The combined picture signal, including vertical and horizontal blanking and
synchronizing signals.
- Compression
- The reduction in gain at one level of a picture signal with respect to the gain at
another level of the same signal.
- Contrast
- The range of light to dark values in a picture or the ratio between the maximum and
minimum brightness values.
- Contrast Range
- The ratio between the whitest and blackest portions of television image.
- Convergence
- The crossover of the three electron beams of a three-gun tri-color picture tube. This
normally occurs at the plane of the aperture mask.
- Crosstalk
- An undesired signal from a different channel interfering with the desired signal.
- dB
- Basically, a measure of the power ratio of two signals. In system use, a measure of the
voltage ratio of two signals, provided they are measured across a common impedance.
- Decoder
- The circuitry in a color TV receiver which transforms the detected color signals into a
form suitable to operate the color tube.
- Definition
- The fidelity of a television system to the original scene.
- Depth of Field
- The in-focus range of a lens or optical system. It is measured from the distance behind
an object to the distance in front of the object when the viewing lens shows the object to
be in focus.
- Depth of Focus
- The range of sensor-to-lens distance for which the image formed by the lens is clearly
focused.
- Digital Signal Processing
- An algorithm within the camera that digitizes data (the image). Examples include
automatic compensate for backlight interference, color balance variations and corrections
related to aging of electrical components or lighting. Functions such as electronic pan
and zoom, image annotation, compression of the video for network transmission, feature
extraction and motion compensation can be easily and inexpensively added to the camera
feature set.
- Distortion
- The deviation of the received signal waveform from that of the original transmitted
waveform.
- Distribution Amplifier
- A device that provides several isolated outputs from one looping or bridging input, and
has a sufficiently high input impedance and input-to-output isolation to prevent loading
of the input source.
- Dynamic Range
- The difference between the maximum acceptable signal level and the minimum acceptable
signal level.
- EIA Sync
- The signal used for the synchronizing of scanning specified in EIA Standards RS-170,
RS-330, RS-343, or subsequent issues.
- Equalizer
- An electronic circuit that introduces compensation for frequency discriminative effects
of elements within the television system, particularly long coaxial transmission systems.
- Fiber Optics
- Also called optical fibers or optical fiber bundles. An assemblage of transparent glass
fibers all bundled together parallel to one another. The length of each fiber is much
greater than its diameter. This bundle of fibers has the ability to transmit a picture
from one of its surfaces to the other around curves and into otherwise inaccessible places
with an extremely low loss of definition and light, by a process of total reflection.
- Field
- One of the two equal but vertically separated parts into which a television frame is
divided in an interlaced system of scanning. A period of 1/60 second separates each field
start time.
- Field of View
- The maximum angle of view that can be seen through a lens or optical instrument.
- Focal Length
- Of a lens, the distance from the focal point to the principal point of the lens.
- Focal Plane
- A plane (through the focal point) at right angles to the principal point of the lens.
- Focal Point
- The point at which a lens or mirror will focus parallel incident radiation.
- Footcandle
- See lumen/ft 2.
- Footlambert (FL)
- A unit of luminance equal to 1/candela per square foot or to the uniform luminance at a
perfectly diffusing surface emitting or reflecting light at the rate of one lumen per
square foot. A lumen per square foot is a unit of incident light and a footlambert is a
unit of emitted or reflected light. For a perfectly reflecting and perfectly diffusing
surface, the number of lumens per square foot is equal to the number of footlamberts.
- Frame
- The total area, occupied by the television picture, which is scanned while the picture
signal is not blanked.
- Frame Frequency
- The number of times per second that the frame is scanned. The U.S. standard is 30 frames
per second.
- Frame Transfer
- A CCD imager where an entire matrix of pixels is read into storage before being output
from the camera. Differs from Interline Transfer where lines of pixels are output
- Frequency Interlace
- The method by which color and black and white sideband signals are interwoven within the
same channel bandwidth.
- Frequency Response
- The range of band of frequencies to which a unit of electronic equipment will offer
essentially the same characteristics.
- Front Porch
- The portion of a composite picture signal which lies between the leading edge of the
horizontal blanking pulse and the leading edge of the corresponding sync pulse.
- f/Stop
- Also called F Number and F System. Refers to the speed or ability of a lens to pass
light. It is calculated by dividing the focal length of the lens by its diameter.
- Gain
- An increase in voltage or power, usually expressed in dB.
- Gamma
- A numerical value, or the degree of contrast in a television picture, which is the
exponent of that power law which is used to approximate the curve of output magnitude
versus input magnitude over the region of interest.
- Gamma Correction
- To provide for a linear transfer characteristic from input to output device.
- Genlock
- A device used to lock the frequency of an internal sync generator to an external source.
- Ghost
- A spurious image resulting from an echo.
- Gray Scale
- Variations in value from white, through shades of gray, to black on a television screen.
The gradations approximate the tonal values of the original image picked up by the TV
camera.
- Hue
- Corresponds to colors such as red, blue, etcetera.
- Hum
- Electrical disturbance at the power supply frequency or harmonics thereof.
- Image Intensifier
- A device coupled by fiber optics to a TV image pickup sensor to increase sensitivity.
Can be single or multi stage.
- Image Plane
- The plane at right angles to the optical axis at the image point.
- Impedance (input or output)
- The input or output characteristic of a system component that determines the type of
transmission cable to be used. The cable used must have the same characteristic impedance
as the component. Expressed in ohms. Video distribution has standardized on 75-ohm coaxial
and 124-ohm balanced cable.
- Incident Light
- The light that falls directly on an object.
- Insertion Loss
- The signal strength loss when a piece of equipment is inserted into a line.
- Interference
- Extraneous energy which tends to interfere with the reception of the desired signals.
- Interline Transfer
- A technology of CCD design, where rows of pixels are output from the camera. The
sensor's active pixel area and storage register are both contained within the active image
area. This differs from "frame transfer" cameras that move all active pixels to
a storage register outside of the active area.
- Interlaced Scanning
- A scanning process for reducing image flicker in which the distance from center to
center of successively scanned lines is two or more times the nominal line width, and in
which the adjacent lines belong to different fields.
- Iris
- An adjustable aperture built into a camera lens to permit control of the amount of light
passing through the lens.
- Isolation Amplifier
- An amplifier with input circuitry and output circuitry designed to eliminate the effects
of changes made at either upon the other.
- Jitter
- Small, rapid variations in a waveform due to mechanical disturbances or to changes in
the characteristic of components. Supply voltages, imperfect synchronizing signals,
circuits, etc.
- Lens
- A transparent optical component consisting of one or more pieces of optical glass with
surfaces so curved (usually Spherical), that they serve to converge or diverge the
transmitted rays of an object, thus forming a real or virtual image of that object.
- Lens Preset Positioning
- Follower Pots are installed on lens that allows feedback to the controller information
relevant to zoom and focus positioning allowing the controller to quickly adjust to a
preselected scene and arrive in focus at the proper focal length automatically.
- Lens Speed
- Refers to the ability of a lens to transmit light, represented as the ratio of the focal
length to the diameter of the lens. A fast lens would be rated <f/1.4; a much slower
lens might be designated as> f/8. The larger the f number, the slower the lens.
- Light
- Electromagnetic radiation detectable by the eye, ranging in wavelength from about 400 to
750 nm.
- Line Amplifier
- An amplifier for audio or video signals that feeds a transmission line; also called
program amplifier.
- Loop Through
- Also called looping. The method of feeding a series of high impedance circuits (such as
multiple monitor/displays in parallel) from a pulse or video source with a coax
transmission line in such a manner that the line is bridged (with minimum length stubs)
and that the last unit properly terminates the line in its characteristic impedance. This
minimizes discontinuities or reflections on the transmission line.
- Loss
- A reduction in signal level or strength, usually expressed in dB. Power dissipation
serving no useful purpose.
- Low-Frequency Distortion
- Distortion effects which occur at low frequencies. In television, generally considered
as any frequency below the 15.75-kHz line frequency.
- Lumen (LM)
- The unit of luminous flux. It is equal to the flux through a unit solid angle
(steradian) from a uniform point source of one candela or to the flux on a unit surface of
which all points are at a unit distance from a uniform point source of one candela.
- Lumen/FT2
- A unit of incident light. It is the illumination on a surface one square foot in area on
which a flux of one lumen is uniformly distributed, or the illumination at a surface all
points of which are at a distance of one foot from a uniform source of one candela.
- Luminance
- Luminous intensity (photometric brightness) of any surface in a given direction per unit
of projected area of the surface as viewed from that direction, measured in footlamberts
(fl).
- Luminance Signal
- That portion of the NTSC color television signal which contains the luminance or
brightness information.
- Lux
- International System (Sl) unit of illumination in which the meter is the unit of length.
One lux equals one lumen per square meter.
- Matrix Switcher
- A combination or array of electromechanical or electronic switches which route a number
of signal sources to one or more designations.
- Modulation
- The process, or results of the process, whereby some characteristic of one signal is
varied in accordance with another signal. The modulated signal is called the carrier. The
carrier may be modulated in three fundamental ways: by varying the amplitude, called
amplitude modulation; by varying the frequency, called frequency modulation; by varying
the phase, called phase modulation.
- Monitor
- A unit of equipment that displays on the face of a picture tube the images detected and
transmitted by a television camera.
- Monochrome
- Black and white with all shades of gray.
- Monochrome Signal
- In monochrome television, a signal wave for controlling the brightness values in the
picture. In color television, that part of the signal wave which has major control of the
brightness values of the picture, whether displayed in color or in monochrome.
- Monochrome Transmission
- The transmission of a signal wave which represents the brightness values in the picture,
but not the color (chrominance) values.
- ND Filter
- A filter that attenuates light evenly over the visible light spectrum. It reduces the
light entering a lens, thus forcing the iris to open to its maximum.
- Noise
- The word "noise" originated in audio practice and refers to random spurts of
electrical energy or interference. In some cases, it will produce a
"salt-and-pepper" pattern over the televised picture. Heavy noise is sometimes
referred to as "snow".
- Non-Composite Video
- A video signal containing all information except sync.
- NTSC
- Abbreviation for National Television Systems Committee. A committee that worked with the
FCC in formulating standards for the present day United States color television system.
- Output
- The signal level at the output of an amplifier or other device.
- Pan and Tilt
- A device upon which a camera can be mounted that allows movement in both the azimuth
(pan) and in the vertical plane (tilt).
- Pan/Tilt Preset Positioning
- Follower pots are installed on pan/tilt unit to allow feedback to the controller and
provides information relevant to horizontal and vertical positioning, allowing the
controller to quickly adjust to a pre-selected scene automatically.
- Patch Panel
- A panel where circuits are terminated and facilities provided for interconnecting
between circuits by means of jacks and plugs.
- Peak Pulse Amplitude
- The maximum absolute peak value of a pulse, excluding those portions considered to be
unwanted, such as spikes.
- Peak-to-Peak
- The amplitude (voltage) difference between the most positive and the most negative
excursions (peaks) of an electrical signal. A full video signal measures one volt peak to
peak.
- Picture Element
- See Pixel
- Pixel
- Short for Picture Element. A pixel is the smallest area of a television picture capable
of being delineated by an electrical signal passed through the system of part thereof. The
number of picture elements (pixels) in a complete picture, and their geometric
characteristics of vertical height and horzontal width, provide information on the total
amount of detail which the raster can display and on the sharpness of the detail,
respectively.
- Primary Colors
- Three colors wherein no mixture of any two can produce the third. In color television
these are the additive primary colors red, blue and green.
- Progressive Scan
- The progressive scan format outputs data from the camera (the signal) in sequential
order as it is scanned. The scan format produces a full frame of video in a continuous
stream, rather than half the image per output sequence in traditional RS-170 CCD cameras.
Standard RS-170 video is interlaced and output in two separate fields, generating
essentially half the image at a time. With Cohu's new 6600 Series Progressive Scan Camera,
a new, full image is output from the camera every 1/60th second, making it ideal for
machines to more quickly process and display information, or act according to programmed
instructions.
- Resolution (horizontal)
- The amount of resolvable detail in the horizontal direction in a picture. It is usually
expressed as the number of distinct vertical lines, alternately black and white, which can
be seen in a distance equal to picture height.
- Resolution, Limiting
- The details that can be distinguished on the television screen. Vertical resolution
refers to the number of horizontal black and white lines that can be resolved in the
picture height. Horizontal resolution refers to the black and white lines resolved in a
dimension equal to the vertical height and may be limited by the video amplifier
bandwidth.
- Resolution (vertical)
- The amount of resolvable detail in the vertical direction in a picture. It is usually
expressed as the number of distinct horizontal lines, alternately black and white, which
can theoretically be seen in a picture.
- Retained Image
- Also called image burn. A change produced in or on the target which remains for a large
number of frames after the removal of a previously stationary light image and which yields
a spurious electrical signal corresponding to that light image.
- RF (Radio Frequency)
- A frequency at which coherent electromagnetic radiation of energy is useful for
communication purposes. Also, the entire range of such frequencies.
- Ripple
- Amplitude variations in the output voltage of a power supply caused by insufficient
filtering.
- Roll
- A loss of vertical synchronization which causes the picture to move up or down on a
receiver or monitor.
- Saturation
- In color, the degree to which a color is diluted with white light or is pure. The
vividness of a color, described by such terms as bright, deep, pastel, pale, etc.
Saturation is directly related to the amplitude of the chrominance signal.
- Scanning
- The process of moving the electron beam of a pickup tube or a picture tube across the
target or screen area of a tube.
- Sensitivity
- In television, a factor expressing the incident illumination upon a specified scene
required to produce a specified picture signal at the output terminals of a television
camera.
- Shutter
- Ability to control the integration (of light) time to the sensor to less than 1/60
second; e.g: stop motion of moving traffic.
- Signal-to-Noise Ratio
- The ratio between useful television signal and disturbing noise or snow.
- Snow
- Heavy random noise.
- Spike
- A transient of short duration, comprising part of a pulse, during which the amplitude
considerably exceeds the average amplitude of the pulse.
- Standard Minimum Signal
- 1000 microvolts at 75 ohms (0dB mV) in RF systems; 0.7-VPP non-composite, 1-VPP
composite in video systems.
- Sync
- A contraction of "synchronous" or "synchronize".
- Sync Generator
- A device for generating a synchronizing signal.
- Sync Level
- The level of the peaks of the synchronizing signal.
- Sync Signal
- The signal employed for the synchronizing of scanning.
- Synchronizing
- Maintaining two or more scanning processes in phase.
- Tearing
- A term used to describe a picture condition in which groups of horizontal lines are
displaced in an irregular manner.
- Test Pattern
- A chart especially prepared for checking overall performance of a television system. It
contains various combinations of lines and geometric shapes. The camera is focused on the
chart, and the pattern is viewed at the monitor for fidelity.
- Transients
- Signals which exist for a brief period of time prior to the attainment of a steady-state
condition. These may include overshoots, damped sinusoidal waves, etc.
- Vertical Resolution
- The number of horizontal lines that can be seen in the reproduced image of a television
pattern.
- Video Amplifier
- A wideband amplifier used for passing picture signals.
- Video Band
- The frequency band width utilized to transmit a composite video signal.
- Video Signal (Non-Composite)
- The picture signal. A signal containing visual information and horizontal and vertical
blanking (see also Composite Video Signal) but not sync.
- Y Signal
- A signal transmitted in color television containing brightness information. This signal
produces a black and white picture on a standard monochrome receiver. In a color picture
it supplies fine detail and brightness information.
- Zoom
- To enlarge or reduce, on a continuously variable basis, the size of a televised image
primarily by varying lens focal length.
- Zoom Lens
- An optical system of continuously variable focal length, the focal plane remaining in a
fixed position.
| |
|